Steering Stem Telescopic Fork Vespa Classic Style Scooter Moped

Steering Stem Telescopic Fork Vespa Classic Style Scooter Moped
Click to enlarge
Price: $69.99 $69.99
Availability: In Stock
Part Number: ST-1-1033-2001
Average Rating: Not Rated

Available Options:
Shipping:

This is a quality steering column, Telescopic Front End for the Vespa Classic Body style scooter design. At the base of the stem and on top of the fork, is a crown-like structure. This front end has an overall length of 710mm, 71cm, (28"). It has the fender ears and several body and structural attachments for the classic scooter style. There are no notches or keyways at the top of this stem. There is a hole at the top of the stem. There is also a slot type hole at the upper mid-stem on the back left. The steering fork measurements are as follows:

  • Base width (outside to outside axle receiver) 210mm, 21cm, 8 11/32"
  • Shaft length (top of stem to the top of the base): 335mm, 33.5cm, 13 3/16"
  • Diameter of the shaft: Top: 24mm,  2.4cm,  15/16"   Bottom (above collar): 30mm, 3.0cm,  1 3/16 "
  • Diameter of the (3) fork hole receivers: 16mm, 1.6cm, 5/8 "
  • Distance from the top of the stem to the hole in the stem: 21.68mm, 2.17cm, 27/32"
  • Size of the stem shaft hole: 10.35mm, 1.04cm, 13/32"
  • Length from the top of the stem to the beginning of the threads on the stem: 54mm, 5.4cm, 2 1/8"
  • Length from the top of the stem to the slot on the back left side: 131mm, 13cm, 5 5/32"
  • Length of the stem slot: 24.3mm, 2.4cm, 61/64"
  • Width of the stem slot: 12.35mm, 1.24cm, 1/2"
Write Review
Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:

Return to Listing