Frequently Needed Parts

These are Common Parts used every day to repair scooters, ATVs, buggies, quads, go karts and mopeds. These parts will often interchange with many different models and brands.

Sort By:
Belt Cover "Bolt Set", (Long Case 10 bolts) for 4 stroke GY6 125 150cc 157QMJ 200-1001-3002
$8.95 $4.95 Add to Cart

Belt Cover Bolts, Flanged Hex Bolts for  the GY6-125/150cc, 157QMJ, Long Case Belt Cover, (10 bolts)

Contains:

  • 8 - M6 x 1.00 x 40
  • 2 - M6 x 1.00 x 65
  • 1 - M6 x 1.00 x 12
Belt Cover "Bolt Set", (Long Case 10 bolts), for 4 Stroke GY6 50 139QMB 100-1001-3000
$6.95 $4.95 Add to Cart

Belt Cover Bolts for the GY6-50 139QMB long case, (10 bolts)

Belt Cover Bolt Set, (Short Case 8 bolts), GY6 125 150cc 157QMJ 200-1001-3003
$6.95 $4.50 Add to Cart

Belt Cover Bolts, Flanged Hex Bolts for the GY6-125/150cc, 157QMJ, Short Case Belt Cover, (8 bolts)

Contains:

  • 6 - M6 x 1.00 x 40
  • 2 - M6 x 1.00 x 65
  • 1 - M6 x 1.00 x 12
Belt Cover Bolt Set, (Short Case 8 bolts), GY6 50 139QMB 100-1001-3001
$6.95 $4.50 Add to Cart

Belt Cover Bolt Set for the 4 stroke GY6-50 139QMB 1P39QMB short case, (8 bolts)

All 8 bolts measure:

  • Size: M6
  • Length: 35mm
  • Thread: 1.0
Body Clip and Screw Set, (Pkg of 5) F-1040-0001
$4.95 $2.00 Add to Cart

This is a package of (5) body clips and screws used to fasten many body parts on scooters, ATVs, quads, buggies and mopeds. It is nice to have extras when you need them.

Brake Hose Line, 46.5" 10mm Performance Racing  Hydraulic 1200-100-1002-5000
$32.45 $11.00 Add to Cart

This is a quality steel braided Front Brake Line Hose for the GY6 and Handsome Boy scooters.  This brake line measures 48 1/2" end to end. The banjo fittings are both 10mm straight.

Brake Lever, Right-Side, Black, Sunny Style Scooters 1200-200-1002-3003
$16.84 $6.00 Add to Cart

This is a quality front right brake lever for the Sunny style scooter designed for the hydraulic system.

Brake Lever, Type A, Rear Drum Brakes, fits Sunny-Style, B-Series 1200-200-1002-3005
$12.94 $6.00 Add to Cart

This is the left side rear drum brake lever for the Sunny and B-series style scooters. This lever has the lever mounting incorporated into the left side cluster

Brake Lever, Type B, Left-Side Rear 1200-200-1002-3001
$12.94 $6.00 Add to Cart

This is a left side replacement brake lever (black) for the hydraulic rear drum.

Brake Light Switch Hydraulic GY6 50cc 150cc 250cc B-1-1002-2001
$6.95 $3.50 Add to Cart

You have two brake switches on the GY6 139QMB, this is the larger type... found less often. (Measures approx. 12 1/2", 317mm)  They are found on the Bashan Classic, Dazon Sicilian, Lance Venice, Moto Fino MF50QT-2, Roketa Sicily MC-17, Schwinn Newport, Tank Viaggio, TNG Milano, Wanjie Big Chief, Zhen Lance Venice ZN150t-20 scooter and many others.

Mechanics Note: The brake switch on a scooter is not just to illuminate the brake light; it is also a safety switch to start the engine. If nothing happens when you push the start button, think about getting one or both of the brakes switches on your model.

Brake Light Switch, Small Cable, GY6, Honda B-1-1002-2002
$6.95 $3.50 Add to Cart

This is the smaller... most common brake switch found on the GY6 139QMB. (Measures approx. 11", 279mm) Brands and models include the Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP, and many others.


Mechanics Note: The brake switch on a scooter is not just to illuminate the brake light; it is also a safety switch to start the engine. If nothing happens when you push the start button, think about getting one or both of these. Remember, you have two brake switches

Brake Shoes, (1 Pair) for 2 stroke 49 50cc JOG Minarelli 1E40QMB, 1PE40QMB 300-1002-1002
$25.94 $8.00 Add to Cart

These are the standard replacement rear brake shoes for the 1E40QMB 1PE40QMB JOG Minarelli 49/50cc 2 stroke scooters. (Approx. 90mm across)  These shoes have a ridge retainer and are specifically made for the JOG scooter.

Brake Shoes, OEM, (1 Pair), 4 Stroke, GY6 50, 125cc, 139QMB, 152QMI 100-1002-1001
$12.94 $7.50 Add to Cart

These are quality replacement brake shoes for the 4-stroke GY6 50cc 125cc 139QMB 152QMI scooter. (Approx. 105mm across) These shoes are universal and fit most scooter brands and models including Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP and many others.

Brake Shoes, Rear, (1 Pair), GY6 150cc 157QMJ 200-1002-1003
$19.44 $8.00 Add to Cart

These are the standard replacement rear brake shoes for the GY6 150cc 157qmj scooter. (Approx. 124mm across. GY6 50cc and 125cc brake shoes are smaller). These shoes fit most scooter brands and models including Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP and many others.  Good products at a great price!

Brake Switch, Box Type, Front Brakes B-1-1002-2004
$6.44 $3.50 Add to Cart

This is the box style Front Brake Switch for the sporty type GY6-125/150 scooters.  These fit many brands including Avanti, Baja, Baron, Bashan, Baotian, Boreem (BMS), Boss, Bravo, CFMoto, Diamo, Electra, Eton, Freedom, JM Star, Qingqi, Roketa, SUNL, Tank, Terminator, Tomahawk II, United Motors, Vento, Verucci, Wildfire, X-Treme,  Yamati , ZNEN, and many others brands and models.

Mechanics Note: The brake switch on a scooter is not just to illuminate the brake light; it is also a safety switch to start the engine. If nothing happens when you push the start button, think about getting one or both of these. Remember, you have both a front and rear switch.

Brake Switch, Box Type, Rear Brakes B-1-1002-2003
$6.44 $3.50 Add to Cart

This is the box style Rear Brake Switch for the sporty type GY6-125/150 scooters.  These fit many brands including Avanti, Baja, Baron, Bashan, Baotian, Boreem (BMS), Boss, Bravo, CFMoto, Diamo, Electra, Eton, Freedom, JM Star, Qingqi, Roketa, SUNL, Tank, Terminator, Tomahawk II, United Motors, Vento, Verucci, Wildfire, X-Treme,  Yamati , ZNEN, and many others brands and models.

Mechanics Note: The brake switch on a scooter is not just to illuminate the brake light; it is also a safety switch to start the engine. If nothing happens when you push the start button, think about getting one or both of these. Remember, you have both a front and rear switch.

Bulb,  Amber Turn-Signal, FSL 1-1023-0004
$6.44 $1.00 Add to Cart

This amber bulb is for use with the clear type lens on turn-signals.

Bulb,  Amber Wedge-Type, FSL Bulb 1-1023-0005
$6.44 $1.00 Add to Cart

This amber bulb is the push-in, wedge-type, turn-signal bulb used on select scooters.

Bulb, 1157,  FSL Dual Filament Tail-Light 1-1023-0008
$5.14 $2.50 Add to Cart

This is dual filament bulb and tail-light that fits most scooters and motorcycles.

Bulb, A-3603, Running Light, Vento 1-1023-0007
$6.44 $2.50 Add to Cart

This A-3603 bulb, 25/25 watt, is found on many scooters and for running lights on the Vento V-Thunder and others.

Bulb, Headlight 18w/18w FSL, Handsome-Boy Style Scooters 1-1023-0001
$6.44 $2.50 Add to Cart

This pointed tip 18w/18w high/low headlight fits many scooters and ATVs including the Handsome-Boy style scooters. A 35w bulb is also available for upgrade.

Bulb, Headlight 35w/35w, FSL, Handsome-Boy Style Scooters 1-1023-0002
$6.44 $2.50 Add to Cart

This pointed tip 35w/35w high/low headlight is a common bulb for many Handsome-boy scooters as well as ATVs. This 35w bulb is brighter and can often replace the 18w bulb. We also stock the 18w headlight if you prefer, as well.

Bulb, Headlight,  FSL ( H4), 18w/18w, 12v 1-1023-0006
$12.94 $2.50 Add to Cart

This is the ( H4 style), 18w/18w, 12v replacement headlight bulb.

Bulb, Turn Signal, Clear, FSL Bulb 1-1023-0009
$5.14 $1.00 Add to Cart

This is a replacement turn signal bulb for use inside a yellow lens turn signal housing.

Cable #7, Throttle/Pump, for 2-Stroke QT Style C-1-1003-4007
$32.44 $10.00 Add to Cart

This is the Throttle/Pump Cable #7 for the 2 stroke scooter.  Be sure to note the cable ends and the cable mid-joint structure. This cable is used on the Dazon, TNG LS49, TNG Venice, and other 2 stroke QT style scooter chassis.  This cable measures approx.:

  • Single cable: (Bend to Center) 16 3/4", 425mm
  • Side 1 (Center to end) 41 3/4", 1060mm
  • Side 2 (Center to end) 36", 914mm
Cable, Speedometer, #5, Threaded Collar on both ends. 38.5", fits many B08 Scooter designs C-S-1003-2005
$19.95 $6.00 Add to Cart

Cable, Speedometer, #5,  Threaded Collar on both ends. 38.5", fits many B08 Scooter designs

Measurements:
    Threaded collar both ends
    Overall Length: 38.5"
    Cable Square both ends: 2.5mm

Cable, Throttle,  AN125/150, and others Twist-Lock Type C-1-1003-4005
$25.94 $6.00 Add to Cart

This is the replacement Throttle Cable #5 with a rare twist lock.  This cable measures from bend to bend approx. 70 1/2", 1791mm.  This cable is used on the Suzuki AN125/150, Haojue QS125T, Suzuki QS125T, Haojue QS150T, Suzuki QS150T, Qingqi QS125T, Qingqi QS150 and many others.

Cable, Throttle,  fits Sunny Style Scooters and others C-1-1003-4004
$19.44 $6.00 Add to Cart

This throttle cable #4, is a new replacement cable for the Sunny style scooter as well as many other styles and types. This cable has a single screw attachment at the throttle housing. Be sure to compare the cable ends.  This cable measures approximately 68" from bend to bend. Brands and models where this cable is used include the Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, and many others... (See cable #3 for the Handsome Boy threaded type cable)

Cable, Throttle, fits Handsome Boy Style Scooters and others C-1-1003-4003
$19.44 $6.00 Add to Cart

This Throttle Cable #3 is often used on the Handsome Boy style scooters. Please pay particular attention to the cable ends. Some Handsome Boy scooters include the Baja BE500, Jonway Lambda, Jonway QT-21, JMstar Z-bike, Longbo LB50QT-22, Moto Fino MF50QT-7, Roketa Bahama MC-07-50, Sunl SL50QT-2, Tank Sporty, VIP Future Champion and many others.  This cable measures from bend to bend approx. 68", 1727mm.

CDI Igniition, DC, High Performance Unlimited, KYMCO Agility 50, 125, KYMCO People 150 101-1006-0032
$89.95 $30.00 Add to Cart

This is a High Performance Non-Rev unlimited CDI for the KYMCO Agility 50cc and 125cc (2006-2011, 2012-2015 with this 6 pin 4 & 2 plug).  This CDI replaces KYMCO Part Number 30410-LBD6-E00.  This CDI is will also work on the KYMCO People 150 (2002-2011) , and KYMCO People 50 4 stroke (2006-2009) and KYMCO Sento 50 4 stroke (2009-2011).

CDI, DC, 6 Pin, Honda CBX125 150cc, Auto angle 1-1006-0024
$51.94 $8.00 Add to Cart

This is a performance DC fired, auto angle CDI for the Honda CBX 125cc 150cc, sold in many countries of the world.

 

Mechanics Note: In general, the DC CDI's tend to be larger in size than the AC ones. If the headlights turn on without the engine running, with just the key on, it is a DC system. AC system headlights require the engine to be running. If the engine will only run with a battery it is DC. If it will run without a battery, it is a AC system. If on the 2-wire side of the plug, there is just one wire, it is a DC system. The AC fired unit will have both wires in place

Clamp, Brake Cable, GY6 50, 139QMB, GY6 125 150cc 157QMJ, Left Side Belt Cover B-200-1001-3104
$1.95 $1.00 Add to Cart

Clamp, Brake Cable, GY6-50, GY6-125/150 left side belt cover

Clamp, Carb Drain Tube, GY6 50, 139QMB, GY6 125 150cc 157QMJ, Left Side Belt Cover B-200-1001-3103
$1.95 $1.00 Add to Cart

Clamp, Carb Drain Tube, GY6-50, GY6-125/150 left side belt cover

Clamp, Throttle Cable Holder, GY6 125 150cc, 157QMJ, Left Side Belt Cover B-200-1001-3105
$1.95 $1.00 Add to Cart

Throttle Cable Holder, GY6-125/150 left side belt cover

Clutch Nut, Rear Clutch, (M10) GY6 50 139QMB F-1040-0010-FNS1.25
$3.84 $1.00 Add to Cart

This is a Rear Clutch Nut for the GY6-50cc 139QMB 1P39QMB scooter. (M10 x 1.25)

Clutch Nut, Rear Clutch, (M10), fits 2 stroke JOG 50 Minarelli 1E40QMB 1PE40QMB F-1040-0010-FNS1.00
$3.84 $1.00 Add to Cart

This is a Rear Clutch Nut for the 2 stroke JOG Minarelli engine - scooter. (M10 x 1.0)

Clutch Rear Nut, (M12), CFmoto, CF250cc 172MM F-1040-0012-FNSL1.25
$3.84 $1.00 Add to Cart

This is a Rear Clutch Nut for the CFmoto CF250 engine - scooter. (M12 x 1.50)

Coil, OEM (OEM) Replacement  GY6 and CF250 1-1008-0005
$16.84 $6.50 Add to Cart

This coil is a replacement for the GY6 4-stroke 50cc, 125cc and 150cc Chinese engines. (139QMB, 157QMI, 157QMJ) Because standard coils can go bad as frequently as the standard CDI ignition module, we recommend that both be kept on hand. These coils are found on the Baja, JMstar, Jonway, Lance, NST Peace, Roketa, Sunl, Tank, TNG, Vento, VIP and many others..

Coil, Replacement, 2 Stroke JOG Minarelli, 1E40QMB 1PE40QMB, Yamaha Zuma,  Malaguti 300-1008-0004
$19.44 $12.00 Add to Cart

This is a high quality and durable replacement Ignition Coil for the JOG Minarelli 2-stroke 1E40QMB 1PE40QMB engine found on numerous 2-stroke scooters, ATVs, quads, buggies, mopeds, mini-ATVs and mini-choppers.

Crankcase O-Ring 7.5x1.5, for 4 stroke water cooled 250cc CF250 CFmoto CN250 172MM B-600-1001-5004
$2.95 $1.00 Add to Cart

Crankcase O-Ring size 7.5x1.5 for 250cc water-cooled CN250 CF250 172MM engines.

Crankshaft NPM Vitron Seal, (Set of 2), 19.8x30x5, GY6 50 125 150cc 139QMB 157QMJ 200-1009-0002
$9.95 $4.00 Add to Cart

This is a set of two NPM Vitron Crankshaft Seals, size 19.8x30x5 for the GY6-50 139QMB and GY6-125/150 152QMI 152QMJ 157QMI 157QMJ engines and many others.

Cylinder Dowel Kit, (Set of 4), for 4 stroke GY6 125 150cc 157QMJ B-200-1010-5002
$6.44 $1.00 Add to Cart

This is a complete replacement set of engine locator dowels (4) (O/D M10 x 16mm, I/D M8) for the 4 stroke GY6 125cc 150cc 152QMI 152QMJ 157QMI 157QMJ engine. Theses dowels go between the crankcase, cylinder and head.

Cylinder Dowel Kit, (Set of 4), for 4 Stroke GY6 50 139QMB B-100-1010-5001
$6.95 $1.00 Add to Cart

This is a complete replacement set of engine locator dowels (4) (O/D M8 x 14mm  I/D M7) for the 4 stroke GY6 50cc 139QMB engine. Theses dowels go between the crankcase, cylinder and head.

Cylinder Long Stud Bolts, (1 Pair), 196mm, M8x1.25, GY6 125 150 152QMI 157QMJ B-200-1010-4004
$15.95 $2.00 Add to Cart

Cylinder Long Stud Bolts, 1 Pair, 196mm, M8x1.25, thread length 20mm & 16mm, Crankcase Bolts, GY6-125/150, Quality, long studs for cinching down the entire top end.

Cylinder Short Stud Bolts, (1 Pair), 188mm, M8x1.25. GY6 125 150 152QMI 157QMJ B-200-1010-4003
$15.95 $2.00 Add to Cart

Cylinder Short Stud Bolts, 1 Pair, 188mm, M8x1.25, thread length 19mm & 17mm, Crankcase Bolts, GY6-125/150, Quality, short studs for cinching down the entire top end.

Exhaust Muffler Bracket Clamp, fits GY6 125 150 152QMJ, 157QMJ 200-1013-1001
$9.95 $3.50 Add to Cart

This is a replacement Exhaust Muffler Bracket and Clamp,  including the hardware, to replace your broken or worn out one. This clamp closes to 94.5mm (3.7")  in diameter.  This fits Baja, Jonway, JMstar, Roketa, Sunl, Tank, TGB, TNG, Vento, VIP and many more...

Exhaust Muffler Bracket Clamp, fits GY6 50 139QMB 100-1013-1000
$9.95 $3.50 Add to Cart

This is a replacement Exhust Muffler Bracket and Clamp to replace your broken or worn out one.  This clamp closes to 87mm (3.4") in diameter. This fits Baja, Jonway, JMstar, Roketa, Sunl, Tank, TGB, TNG, Vento, VIP and many more...

Exhaust Stud (6M x 1.0) and Muffler Cap Nut for 6mm GY6 50, 125, 150cc, and fits 4 Stroke Honda style Horizontal engine Dirt Pit Bike Quad ATV F-1040-0006-CAPN1.0
$4.95 $2.00 Add to Cart

Exhaust Stud (6M x 1.0) and Muffler Cap Nut for the 6mm GY6 50cc, 125cc, 150cc, Horizontal 50 -125

Exhaust Stud Nuts, 1 Pair (2),  GY6 50 125 150cc 6M Locking Alloy F-1040-0006-CN1.00
$4.95 $3.00 Add to Cart

This is one pair (2) nut fasteners for the GY6 Exhaust Stud Bolts.  This is made from a special aircraft alloy metal that withstands high temperatures.  This is a locking nut to handle the vibrations.  Also, this nut will not rust or corrode, making it much easier to change or remove at some later date.

Flywheel Rotor Nut, (M10), GY6 50 139QMB F-1040-0010-FNS1.25
$3.84 $1.00 Add to Cart

This is a replacement Flywheel Rotor Nut and Clutch Nut for the GY6-50 139QMB engine to replace your stripped out, worn out or lost original. (M10 x 1.25 cerrated)

Flywheel Rotor Nut, (M12), GY6 125 150cc 157QMJ F-1040-0012-FNSL1.25
$3.84 $1.00 Add to Cart

This is a replacement Flywheel Rotor Nut to replace your stripped out, worn out or lost original. (M12 x 1.25)

Flywheel Rotor Nut, Clutch Nut, (M10), GY6 50cc, 139QMB F-1040-0010-FNSL1.25
$3.84 $1.00 Add to Cart

This is a replacement Flywheel Rotor Nut and Clutch Nut for the GY6-50 139QMB engine to replace your stripped out, worn out or lost original. (M10 x 1.25 cerrated)

Flywheel Rotor Puller Tool,  GY6 50 125 150 100-1032-5000
$25.94 $11.00 Add to Cart

This is a quality a reversible flywheel puller tool for the 4 stroke GY6 50cc, 125cc, and 150cc scooter, quad, buggy, and ATV engine. This tool is a "must have" for the tool box and is ideal for making the job much easier.

Flywheel Rotor Puller Tool, CF250, CN250, Honda Helix, 172MM 600-1032-5008
$49.95 $15.50 Add to Cart

Tool, Flywheel Rotor Puller, CF250, CN250, Honda Helix, 172MM engine, 33mm x 1.50 Right Hand Thread (Female)

Flywheel Rotor Puller Tool, for 90 100 2 Stroke Minarelli 100-1032-5000
$25.94 $11.00 Add to Cart

This is a quality a reversible flywheel puller tool for the JOG 90 and JOG 100 scooter, quad, buggy, and ATV engine. This tool is a "must have" for the tool box and is ideal for making the job much easier.

Fuel Gas Gauge Sending Unit, Fuel Tank Level,  Gauge Sensor Float,  Sunny Style 1200-200-1016-3000
$19.44 $10.00 Add to Cart

This is a complete Sending Unit,  Fuel Gas Gauge Sensor and Float, 3 wire, for the Sunny style, as well as other scooter styles. This harness measures approx. 22", 559mm in length.

Fuel Pump, Vacuum operated, GY6 50 125 150cc 139QMB 157QMJ 1-1016-1007
$39.95 $15.00 Add to Cart

Fuel Pump, GY6-50 - 150cc, 4-stroke, Vacuum operated,  Hole spacing: 76mm,  Overall Height: 33.5mm, fits various makes and model scooters

Fuel Valve M16x1.0 Eton, E-ton Viper, Yukon, Yukon II, Scooter Moped ATV 810419 1-1016-1006
$39.95 $20.00 Add to Cart
4 out of 5 Stars!

This vacuum operated, tank-mounted, fuel valve petcock (aka fuel pump) is found on many of the E-TON buggies, scooters & ATV's with OEM part numbers 810419 These valves often go bad or are suspect.

These fit the E-TON 2009 Viper 150 RXL-150R09, 2005 - 2008 Viper 150 RXL-150R, Yukon 155cc, 2008 & earlier Yukon YXL-150, 2005 - 2010 Yukon II CXL-150 and many other brands and models.

Please note that Eton uses two different valves. Most Eton Beamers take the M14x1.0 Fuel Valve.  Please measure the nipple on the bottom of your tank or the inside diameter of the valve nut to see if it is M14 (.55", just under 9/16") or 16mm (.62" 5/8")  to be sure you are ordering the correct one for your engine.  Both Valves have a wrench size of 22mm to remove the nut and valve.
 

Fuel Valve Petcock, 4-Way, In Line, GY6, 139QMB 157QMJ 1-1016-1004
$15.95 $7.20 Add to Cart

Fuel Valve Petcock, 4-Way, 4-Port, (In-Line), GY6, 4-stroke, vacuum operated, Hole I/D: 7mm, (fits Tank, Sunl, Roketa, Vento, TNG, VIP, Baja, Jonway, JMstar, Peace, Lance, NST, Adly as well as others)

Fuel Valve, (M14 x1.0), for Eton E-ton Beamer I, Eton Beamer II Scooters 750128 1-1016-1005
$25.94 $18.00 Add to Cart
5 out of 5 Stars!

This vacuum operated, tank-mounted, fuel valve petcock (aka fuel pump) is found on the 2005 & earlier and 2006 - 2010 E-TON Beamer PN, PN2, PN2B, PN2C, PN2D, and PN2G, with OEM part numbers 750128 .  This valve has been known to fit some Benelli, Diamo, Eurastrada Rx8 50cc 2T, Honda's, Honda Aero 83 - 84, Honda Spree 83 -84,  Keeway, Matrix 50, some QJ scooters such as QJ B08, Strada RX8, Velocity GTX 50, Vento Phantom R4I and Vento Triton, Yamati,.  These valves often go bad or are suspect.

Please check your measurements before ordering since we sell 3 different fuel valves which look exactly alike with the only difference being the internal measurements. All 3 valves have a 22mm nut.

Please note that Eton uses two different fuel valves. Some Eton products such as the Viper, Yukon and Yukon II take our other listing, the M16x1.0 Fuel Valve,   Please measure the nipple on the bottom of your tank or the inside diameter of the valve nut to see if it is M14 (.55", just under 9/16") or 16mm (.62" 5/8")  to be sure you are ordering the correct one for your engine.  Both Valves have a wrench size of 22mm to remove the nut and valve.
 

Measurements:

  • Valve Nut I/D: 14mm
  • Tank Nipple O/D: 13.99mm
  • Nipple Threads; Very- Fine
  • Nut Wrench Size: 22mm

 

 


 

Fuel Valve, (M16X1.5), most common Petcock Valve GY6 50 150 250cc 139QMB 157QMJ 172MM Moped ATV 1-1016-1002
$19.44 $6.00 Add to Cart

This is the most commonly found tank mounted Fuel Valve Petcock, (M16x1.5), GY6-50, GY6-125, GY6-150, GY6-250, 139QMB, 152QMI, 152QMJ, 157QMI, 157QMJ, 172MM, vacuum operated, fits Baja, Jonway, JMstar, Peace, Lance, NST,  Roketa, Sunl, Tank, TNG, Vento, VIP, as well as others.

Measurements:

  • Valve Nut I/D: 16mm +
  • Tank Nipple O/D: 15.75mm
  • Nipple Threads; Semi- Fine
  • Nut Wrench Size: 22mm
Fuel Valve, (M16x1.5), Tank Mounted, JOG Minarelli 2-Stroke 1-1016-1003
$19.44 $6.00 Add to Cart

This vacuum operated, tank-mounted, fuel valve petcock (aka fuel pump), (M16x1.5), JOG 2-stroke, vacuum activated. These valves often go bad or are suspect. The nut attachment is M16x1.5.  These are found on  for the Qingqi QM50QT-4G, TGB, Vento Zip R3i, and various other models.

Measurements:

  • Valve Nut I/D: 14mm +
  • Tank Nipple O/D: 15.75mm
  • Nipple Threads; Semi- Fine
  • Nut Wrench Size: 22mm

   
Mechanics Note: The diaphragm inside this valve fails, it will supersede your carburetor float valve and cause your engine to flood to where it will cause it to lock-up while sitting. This type screws to the bottom of the fuel tank. Get quality products you can trust from us!

Fuse, fits GY6 Scooters, Quads, ATVs, Go Karts B-1-1049-0003
$2.95 $1.00 Add to Cart

This is the standard replacement barrel fuse for all GY6 scooters, ATVs, quads and buggies. It is good to have extras when you need them.

Horn, 12v, (OEM),  Universal 1-1018-0000
$9.04 $4.00 Add to Cart

This replacement 12v horn is the universal standard, ready and easy to mount and install.

Hose, Vacuum, Fuel Line, Racing Performance (Priced/Per foot) 1-1016-0002
$3.46 $1.00 Add to Cart

This is a very high quality, transparent Tiawanese fuel and vaccum line that will replace your original Chinese worn out, leaking, or broken lines.  This is very tough and hard to cut, yet very flexible. This is made from excellent material!

Ignition Pick Up Coil, Pulse Trigger, GY6 50 125 150cc 139QMB 157QMJ 1-1019-0002
$16.95 $9.95 Add to Cart
5 out of 5 Stars!

This is the Ignition Pick Up Trigger or Pulse Coil for the GY6 50cc, 125cc, and 150cc engines.

Intake Manifold O-Ring, GY6 50, 139QMB B-100-1020-1000
$2.95 $1.00 Add to Cart

O-Ring, Intake Manifold, GY6-50, 139QMB, I/D 21mm, O/D 25mm, Thickness: 1.88mm

Key Set, Ignition Switch, 4 Pin, 4 wire, Female Plug, Universal, ATV Quad, Tao Tao, Redcat, SSR 1-1021-0012
$24.95 $6.00 Add to Cart

Ignition Key Switch, ATV key switch, two position key switch, with 4 wire connectior, 4 pin, female plug.  This Universal Ignition Key Switch will work in most applications including ATVs, buggies, quads, scooters, mopeds, pit bikes, dirt bikes and more. The 4-wire connector is adaptable. Models where this key set fits include quads such as the Tao Tao ATVs, SSR, Redcat ATVs and many others....  

Key Set, Ignition,  (Handsome-Boy Style Scooters) 1200-100-1021-0002
$57.95 $25.00 Add to Cart

This Ignition Key Set kit fits the Handsome-boy style scooters. This kit includes the lock, ignition key switch, glove box lock, seat latch, an extra spare key and the mounting clips. These have a four prong square connector. Handsome-boy scooters include the Baja BE500, JMstar Z-bike, Jonway Lambda, Longbo LB50QT-22, Roketa Bahama MC-07-50, Sunl SL50QT-2, Tank Sporty, VIP and many others...

Key Set, Ignition,  (Hunter-Style Scooters) 1200-500-1021-0003
$58.44 $25.00 Add to Cart

   This Complete Ignition Key Set is for the Hunter style scooter.     The Hunter Key Set has a 4-pin connector and 4-wires. They are Red, Green, Black, and Black/White   .  These scooters include the Baja SC150, Falcon Scooter, JMstar Eagle, Jonway Epsilon 150, Lance GS-R 150, Longbo LB150t-12, Roketa Fiji, Tank Racer, TNG DR150, Vento Phantom and many more....

  

 

Key Set, Ignition, (Sunny Style Scooters),  5-wire, 6-pin connector 1200-200-1021-0007
$54.95 $25.00 Add to Cart

This Sunny-style Ignition Key Set comes complete with the ignition, seat lock, locking gas cap, mount, seat latch & cable, and two keys. This ignition has a 5-wire, 6-pin connector. This is fairly universal and can be used in several applications. Be sure to match the styles pictured as close as possible. Compare all of our key sets to your use.

We also stock locking gas caps, available separately, if needed. Sunny-style applications include the Baja SC50, Dazon Diamondback, Hammerhead, JMstar Breeze, Jonway Beta 50, Lance GTR 50, Longbo LB50QT-6, Roketa Maui MC-08-50, Sunl SL50QT-7 Sporty, Tank Urban 50 and many others...

Key Set, Ignition, Complete,  (Cruiser Flagship Style Scooters) 1200-800-1021-0006
$58.44 $25.00 Add to Cart

This is the Complete Key Set for the Flagship style scooters.  This switch kit includes the complete ignition key switch and seat lock kit and two keys.  Flagship-style scooters  include the JMstar Big Sheep, Longbo LB150qt-2 Voyager, NST, Roketa Bali, Tank Touring 250, TNG TS250, and many others.

Key Set, Ignition, Complete,  fits Vespa Hot Rod Style Scooter designs 1200-400-1021-0011
$58.44 $25.00 Add to Cart

This is the Complete Key Set for the Vespa Classic style scooters.  This switch kit includes the complete ignition key switch and seat lock kit and two keys.  Vespa Classic-style scooters  include the Lance Vintage, Roketa Capri, TNG Low Boy, Vento Hot Rod and many others.

Key Set, Ignition, for Hurricane Style Scooters 1200-1100-1021-0010
$58.44 $25.00 Add to Cart

This is the Complete Switch & Key Set for the Hurricane style scooters.  This switch kit includes the front basket trunk, glove compartment, ignition key switch, latches, seat lock, and two keys.  Hurricane-style scooters include the Keeway Hurricane, MotoMojo Uptown 50, TNG LS49, Vento Zip and many others.

Key Switch Set, Ignition, 4 Pin, 4 wire, Male Plug, Universal, Quad ATV 1-1021-0008
$24.95 $6.00 Add to Cart

Ignition Key Switch, ATV key switch, two position key switch, with 4 wire connectior, 4 pin, male plug.  This Universal Ignition Key Switch will work in most applications including ATVs, buggies, quads, scooters, mopeds, pit bikes, dirt bikes and more. The 4-wire connector is adaptable. Models where this key set fits include quads such as the Tao Tao ATVs, SSR, Redcat ATVs and many others....  

M16 x 1.50, Flanged Locking Nut F-1040-0016-FLN1.50
$3.84 $1.00 Add to Cart

This is a M16 x 1.50, Flanged locking nut, Sunny-Style, for many application including the Wheel lock nut on the Handsome-Boy Scooters and 250cc 4-stroke water-cooled CN250 172mm engines.

Mirror Set,  (8mm) thread, Black, GY6 and other scooters 1-1025-0001
$32.44 $16.00 Add to Cart

This is a replacement 8mm Mirror Set (black) which will replace most mirrors. These have the 8mm regular right-handed (RH) thread. These will fit Baja, Lance, NST, JMstar, Jonway, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP and many others.

Rear Brake Stop Switch with Spring, Foot Activated B-1-1002-2005
$13.95 $3.50 Add to Cart

Rear Brake Stop Switch and Spring for foot activated rear brake on many scooters and motorcycles.

Rectifier Regulator, Voltage Regulator, 4 pin flat style, Qingqi QM50QT-B2 and others 1-1027-0011
$12.94 $6.00 Add to Cart

Voltage Regulator Recitifier, 4 pin flat style, fits Qingqi QM50QT-B2 and various other makes and models.

Resistor, 5 Ohm Ballast B-1-1027-1001
$9.72 $6.00 Add to Cart

This is the 5 ohm ballast resistor found in many applications.

Shipping Charge - Scarrow 999
$0.00 $43.00 Add to Cart

International Shipping Charge Adjustment

Spark Plug, BP7HS, NGK, 2 Stroke, 1PE40QMB, TGB, Suzuki 1-1028-0005
$3.95 $3.00 Add to Cart

Spark Plug, NGK BP7HS, Eton, Suzuki LT50, TGB, Vento Triton, Vento Zip R3i, Yamaha 1PE40QMB, Yamaha Razz and many others..

Specs:

  • •Thread Size: 14mm
  •  •Reach: 12.7mm (1/2 inch)
  •  •Hex Size: 20.6mm (13/16 inch)
  •  •Gap: 0.7mm (.028 inch)
  •  •Heat Range: 7
Spark Plug, C7HIX, Iridium High Performance, GY6, Sachs, Honda 101-1028-0007
$12.95 $9.00 Add to Cart

This is a German Quality Xtra Power Performance HMK C7HIX Spark Plug for the  horizontal Honda Trail style engines, Honda, Kawasaki KLX and KSR  2 valve Heads on the 49/86/90/110/120/125/140/150/160/170, and Sachs Madass . This plug also fits the GY6 4-stroke 50, 125 & 150cc engines in many models including the Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP, and many others. Service Manual recommend a gap:  .5 -.6mm (0.22 -.24 inches).

Spark Plug, C7HSA, NGK, Mid-Heat, GY6, Sachs, Honda 1-1028-0001
$3.85 $2.10 Add to Cart

This is a high quality NGK C7HSA (mid heat) spark plug for the  horizontal Honda Trail style engines, Honda, Kawasaki KLX and KSR  2 valve Heads on the 49/86/90/110/120/125/140/150/160/170, and Sachs Madass 125 . This plug also fits the GY6 4-stroke 50, 125 & 150cc engines in many models including the Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP, and many others. Many manuals recommend a gap of .5 -.6mm (0.22 -.24 inches).

  • Thread Size: 10mm
  • Hex Size: 16mm (5/8 inch)
  • Gap: 0.7mm (.028 inch)
  • Reach: 12.7mm (1/2 inch)
  • Heat Range: 7
  • Does not include terminal nut
Spark Plug, D8EA,  NGK , BMW, Honda, Kawasaki, Suzuki, Yamaha 1-1028-0008
$3.99 $3.00 Add to Cart

NGK D8EA Spark Plug, high quality copper core, triple sealed plug for longer life and top performance.  Fits many scooters, quads, buggies and ATVs including BMW, Honda,  Kawasaki, Suzuki, Yamaha and many many other makes, models and years.  This plug does not include a terminal nut.                                                                            

Specs:

  • Gap: 0.7mm (.028 inch)
  • Heat Range: 8
  • Hex Size: 18mm (11/16 inch)                                          
  • Reach: 19mm (3/4 inch)
  • Thread Size: 12mm           
Spark Plug, NGK BR7HSA, fits 2 Stroke JOG Minarelli 1PE40QMB Moto Morini, Suzuki, TGB 300-1028-0002
$3.84 $3.00 Add to Cart

This is a high quality NGK BR7HSA Spark Plug for 2 Stroke, 1PE40QMB Minarelli, Moto Morini, Suzuki, TGB engine. 

Specifications:

  • Thread Size: 14mm
  • Hex Size: 20.6mm (13/16 inch)
  • Gap: 0.7mm (.028 inch)
  • Reach: 12.7mm (1/2 inch)
  • Heat Range: 7
Speedometer Cable #1,  Threaded end Collar end, 39", Universal, fits some GY6 125 150 scooters C-S-1003-2001
$12.94 $5.00 Add to Cart

This is a 39" threaded one end speedometer cable used on many scooters and mopeds.

Measurements:

  • Overall Length: 39"
  • Threaded one end
  • Collar end Width: 14.87mm
  • Cable square both ends: 2.5mm
Speedometer Cable #3,  Threaded end -Collar end, 42", Universal, fits some GY6 125 150 scooters C-S-1003-2003
$19.95 $6.00 Add to Cart

Cable, Speedometer, #3,  Threaded end - Collar End, 42", GY6-125/150cc

Measurements:

  • Overall Length:  42"
  • Cable both ends: Square 2.5mm
  • Threaded one end
  • Collar end width: 11.9mm
Speedometer Cable, 38" Universal C-S-1003-2002
$12.95 $5.00 Add to Cart
5 out of 5 Stars!

This very common universal speedometer cable is found on scooters. It secures on the wheel end by a single screw, at the guage end, it is secured by a threaded nut.  This cable fits many brands and models including Baja, Jonway, JMstar, Keeway, NST, Peace, Roketa, Schwinn, Sunl, Tank, TNG, Vento and many others....

Measurements:

  • Overall Length: 38"
  • Split end on the Collar
  • Collar width: 14.75mm
  • Square cable on the threaded end
Speedometer Hub Gear Box, Puck, fits Handsome-Boy Style Scooters and more 1200-100-1003-3002
$25.94 $8.00 Add to Cart

This is a Speedometer Hub Gear Box for applications with the 1/2" axle. This drives the speedometer through the speedometer cable. This has a single set screw to secure the cable.

Measurements:

  • This fits speedometer cable part # C-S-1003-2002 
  • Speedometer Cable Diameter Opening: 15mm
  • Overall Length: 72mm
  • Hub Inner Diameter: 12mm

Spring, Center Stand Main Return Spring B-1-1030-7000
$5.14 $3.00 Add to Cart

This is a replacement return main center-stand spring to replace that worn out or lost spring.  This springs fits the GY6 50 and may have application for the 150cc and JOG engine scooters.

Starter Clutch Removal Tool, GY6 125 150 157QMI 157QMJ 152QMI 152QMJ 200-1032-5001
$25.95 $10.00 Add to Cart

This is a very handy Starter Clutch Removal Tool for a quicker and easier removal without damaging the clutch or engine.  This tool fits the GY6 125cc and 150cc 152QMI and 157QMJj engines. This is a "must have" for the tool box.

Starter Solenoid Relay,  Universal 1-1031-5001
$19.44 $8.00 Add to Cart

This is a simple and basic starter solenoid relay that can be used on all Chinese engines. This solenoid can handle 12V DC 100 amps of current.

Stator Tool, GY6 50 80 100 125 150, CF250 CN250 engines 1-1032-5002
$29.95 $25.00 Add to Cart

This handy fully adjustable Stator Tool will make the job of stator removal much easier.  This fully adjustable tool will help prevent damage to the stator and your engine.  Works on most 4-stroke scooter, ATV, buggy, and quad engines 

Throttle Cable, #9, (Sheath Length 55")  Suzuki AG50, AD50, scooter C-1-1003-4009
$23.95 $10.00 Add to Cart

This 55" (sheath length) Throttle Cable is for the Suzuki AG50, AD50 scooter

Throttle Cable, (55" sleeve length) for 2 Stroke C-1-1003-4008
$23.95 $10.00 Add to Cart

This Throttle Cable (55" sleeve length) for the single cable 2 stroke. (Note: this is not for the 4 stroke B08 scooter)

Tire Valve,  90-Degree, Universal 1-1039-0001
$5.14 $1.00 Add to Cart

This is a good quality replacement tire valve insert for Chinese scooter wheels. This valve has a 90-degree angle.

Turn Signal Flasher Relay,  2 Pin, Universal 1-1035-0001
$9.74 $3.50 Add to Cart

This is a universal 2-pin turn signal relay for any scooter, ATV, buggy or kart where a 2-pin relay is needed. This relay fits Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP and many others. These can be easily modified to fit any turn signal system. These fit GY6, 139QMB, 1E40QMB, 1PE40QMB, 152QMI, 152QMJ, 157QMI, 157QMJ and many others.

Turn Signal Flasher Relay,  3 Wire, 3 Pin Pigtail, Universal 1-1035-0002
$9.74 $3.50 Add to Cart

This is a universal 3-pin 3-wire pigtail type turn signal relay for any scooter, ATV, buggy or kart where this relay is needed. This relay fits Baja, JMstar, Jonway, Lance, NST, Peace, Roketa, Sunl, Tank, TNG, Vento, VIP and many others. These can be easily modified to fit any turn signal system. These fit GY6, 139QMB, 1E40QMB, 1PE40QMB, 152QMI, 152QMJ, 157QMI, 157QMJ and many others.

Variator Front Clutch Nut, (M12), GY6 125 150cc 152QMI 157QMJ F-1040-0012-FNSL1.25
$3.84 $1.00 Add to Cart

This is the replacement Front Variator Clutch Nut to replace your stipped, worn-out or lost original.  (M12 x 1.25)